Sonnet-technologies Crescendo_NuBus Processor Upgrade Card Manuale Utente Scaricare il pdf (Pagina 55)

Power Macintosh 8100, 8115, and Workgroup Server 8150 Installation

Install Crescendo Card Into PDS Slot

Align the Crescendo card over the PDS slot on the logic board with the

card’s heatsink facing toward the power supply (Figure 19). Gently press

down until the card is firmly seated in the PDS slot.

Remove Access Port Cover From Middle NuBus Port

1. Remove the access port cover (if installed) from the middle NuBus

port located at the back of the computer (Figure 20). Use your

finger or a small flatblade screwdriver to push it out from the port

(Figure 20).

Figure 19: Install Crescendo into PDS slot

PDS slot

Crescendo card

(with attached video flex cable)

Figure 20: Push out middle NuBus access port cover with screwdriver

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 96 97

Nessun commento

Sonnet-technologies Crescendo_NuBus Processor Upgrade Card Manuale Utente Pagina 55